Arducam CSI Camera Module 5MP OV5640
Compatible Products
Hardware
The Arducam CSI Camera Module 5MP OV5640 is sold together with a flat connector cable.
The following Toradex carrier boards support the MIPI CSI-2 interface and are compatible with the camera kit out of the box:
This camera module is supported for the following SoMs:
Software
BSP/Torizon OS 7
You can use the camera after applying the required device tree overlays. These overlays are available on Toradex Linux BSP and Torizon OS Version 7, supporting the modules listed in the Hardware section.
Please follow the instructions for your chosen Operating System:
- Toradex Linux BSP 7: First Steps with Arducam CSI Camera Module 5MP OV5640 (Linux)
- Torizon OS 7: First Steps with Arducam CSI Camera Module 5MP OV5640 (Torizon)
Revision History
Click to See the Product Numbering Scheme
Product Number (PID8) Format
The format of the 8-digits Product Number (PID8) is the following:
The below table describes the structure of the Product Number (PID8):
| Field | Description |
|---|---|
| PPPP | 4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.) |
| VV | 2-digits number, indicating the Major and Minor Version (in that order) |
| AA | 2-digits number, indicating the Assembly Variant |
See the complete list of available combinations on the Revision History table of the corresponding product page.
Example
Product number (PID8): 00291100:
0029: Apalis iMX6D 512MB
11: Major Version 1, Minor Version 1, Version V1.1 in short
00: Assembly Variant A
A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.
| Product # | Product Description | Changes from Previous Version | Release Date | PCN Document |
01811000 | CSI Camera Set 5MP OV5640 V1.0A | Initial Release | Q4, 2024 |