Skip to main content

Capacitive Touch Display 10.1" LVDS

Capacitive Touch Display 10.1 Inch LVDS Front

(Double-Click to Zoom)

Getting Started​

This page contains basic information related to the Capacitive Touch Display 10.1 Inch LVDS.

Recommendation for a first-time order​

For starting with the Capacitive Touch Display 10.1" LVDS Toradex recommends the following products:

First Steps​

Please check the article below for all details on using the display.

Having trouble?​

Please contact our technical support. Various options of technical support are mentioned in the article below.

Features​

Main Features​

Capacitive Touch Display 10.1" LVDS​

  • Resolution: 1280x800px
  • LVDS 8-bit
  • Touch Interface: I2C
  • 30 pin LVDS and 10 pin FFC cable to connect with a Carrier Board

Datasheets​

Datasheet​

10.1 inch LVDS Capacitive Touch Display 1280x800 - Datasheet

Mechanical Model​

Compatible Products​


[1] Verdin DSI to LVDS Adapter is required.
[2] Capacitive Touch Adapter is required.
[3] For Ixora V1.0A Capacitive Touch Adapter is required, V1.1A or above are directly compatible.
[4] The LVDS cable that comes with the [Capacitive Touch Display 10.1" LVDS](/hardware/accessories/displays/capacitive-touch-display-101inch-lvds) is only compatible with Iris V2.0 onward. The LVDS signal on Iris is provided through an RGB to LVDS transmitter. LVDS is not available on most Colibri Computer on Modules, consult the respective datasheet to confirm.
[5] [Colibri iMX8X](/hardware/colibri-som-family/modules/colibri-imx8x) has a native dual-channel LVDS exposed on an FFC connector. This connector is not compatible with the cables that come with the Capacitive Touch Display 10.1" LVDS. If you use Colibri iMX8X + Iris Carrier Board V2.0 or newer, you can evaluate the display out-of-the-box due to [4], but it will not be using the native LVDS interface.

Revision History​

Click to See the Product Numbering Scheme

Product Number (PID8) Format​

The format of the 8-digits Product Number (PID8) is the following:

Product Numbering Scheme

The below table describes the structure of the Product Number (PID8):

FieldDescription
PPPP4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.)
VV2-digits number, indicating the Major and Minor Version (in that order)
AA2-digits number, indicating the Assembly Variant

See the complete list of available combinations on the Revision History table of the corresponding product page.

Example​

Product number (PID8): 00291100:

0029: Apalis iMX6D 512MB11: Major Version 1, Minor Version 1, Version V1.1 in short00: Assembly Variant A

A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.

1212xxxx - Capacitive Touch Display 10.1 Inch LVDS​

Product #Product DescriptionChanges from Previous VersionRelease DatePCN Document
12121000
Capacitive Touch Display 10.1 Inch LVDS  V1.0
Initial Release
12.09.2018
 

Errata/Known Issues​

Errata document​

Capacitive Touch Display 10.1 Inch LVDS Errata

Errata/Known issues​

Migration in Progress

Issue trackers are not yet available in the new developer website. See it on the archived developer website.

Send Feedback!