Skip to main content

u-blox MAYA-W260 Wi-Fi & Bluetooth module

Introduction​

The MAYA-W260 is a Wi-Fi 6 & Bluetooth 5.2 module based on the u-blox MAYA family form factor. The device is based on the NXP IW611 chipset.

How to get started​

We have a step by step Getting Started Guide for the following modules:

After following the step-by-step guide above, you can visit our article WiFi Support on Toradex's Linux Images with complementary information.

Certification documents for u-blox MAYA-W260 Wi-Fi / Bluetooth module​

For information about Certification, please refer to Certification documents for u-blox MAYA-W2 Wi-Fi / Bluetooth module.

For information about RF cables and antennas certification, please refer to Wi-Fi certification on Wi-Fi accessories recommended for Toradex modules.

Radio Frequency Calibration Data​

The MAYA-W260 has been calibrated before shipment, and the data has been recorded in the module's OTP memory. That way, it's not necessary to set any calibration data when using it.

Toradex Modules with the MAYA-W260​

System on ModuleProduct NumberVersion
SMARC iMX95 Hexa 8GB Wi-Fi / Bluetooth IT0096V1.0A
Verdin iMX95 Hexa 8GB WB IT Wi-Fi / Bluetooth IT0089V1.0A
Verdin AM62P Quad 2GB WB IT Wi-Fi / Bluetooth IT0099V1.0A

Key Features of the MAYA-W260​

Wi-Fi Features​

  • Wi-Fi 6 (802.11a/b/g/n/ac/ax) dual-band 2.4 and 5 GHz
  • 1x1 dual antenna
  • Data rate up to 600 Mbps (MCS11)
  • SDIO 3.0 host interface
  • OFDMA (Downlink and Uplink)
  • Target Wake Time (TWT)
  • Security: WPA3 (Personal and Enterprise)
  • Supports simultaneous station, access point and P2P modes

Bluetooth features​

  • Bluetooth 5.4 (Bluetooth BR/EDR and Bluetooth Low Energy)
  • LE Audio
  • High-speed UART host interface with standard HCI transport layer
  • PCM/I2S audio interfaces
  • Encryption (AES) support
Send Feedback!