Search by Tags

US15W

 
Applicable for

Article updated at 27 Sep 2012

US15W codename Poulsbo is the System Controller Hub (SCH) used for Toradex Robin and Woodpecker x86 modules.

There are several versions available from the US15. Both, Robin and Woodpecker are using the US15W (22x22mm^2) due to its very small form factor.

Intel® System Controller Hub US15W

  • Thermal Design Power: 2.3 watts
  • Temperature Range: Commercial: 0° to +70°C
  • Package: 1249-ball FCBGA lead free, 22x22 mm^2

Documentation available under: http://www.intel.com/p/en_US/embedded/hwsw/hardware/atom-z5xx/hardware?wapkw=ALL(us15w+eds)

Intel® System Controller Hub US15WP

  • Thermal Design Power: 2.3 watts
  • Temperature Range: Commercial: 0° to +70°C
  • Package: 1295-ball FCBGA lead free, 37.5x37.5 mm^2

Intel® System Controller Hub US15WPT

  • Thermal Design Power: 2.3 watts
  • Temperature Range: Industrial: -40° to +85°C
  • Package: 1295-ball FCBGA lead free, 37.5x37.5 mm^2

Intel US15W Chipset Driver installation

  • Open the "US15W - USBC XPpro Driver" site on http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=3036&DwnldID=16645
  • Download and open the file "US15W_USB_Client_Drivers_XPPro.zip"
  • Note: This file include a driver to use the USB Client Port under Windows XP, but does also include the Chipset Driver.
  • Important: It is not necessary nor useful to install the USB Client Driver if you do not need a USB Client Port. If you need the USB Client Port you have to enable this function in the BIOS setup first.
  • Open file "384763_Chipset.INF.zip", open file "infinst_autol.zip" and unpack the files to an empty directory on the desktop. Switch to this directory and run "Setup.exe"

Intel US15W Performance Information

IDE

The IDE interface supports the following transfer modes: