Skip to main content

Apalis Evaluation Board

Apalis Evaluation Board

(Double-Click to Zoom)

Getting Started

This section contains initial information needed to set-up the Apalis Evaluation Board for the first time.

Recommendation for a first-time order

Toradex recommends to order the following additional products for your fist-time order:

All the products can be ordered online at Toradex Webshop.

Getting started for the first time?

For detailed step-by-step instructions about how to start with both, SoM and Carrier Board, please have a look at our step-by-step Getting-Started Guide:

Product-specific information for the Apalis Evaluation Board:

Having trouble?

Please contact our technical support. Various option of technical support are mentioned in the article below.

Features

I/O Support

  • USB 3.0 (1x Host, 1xOTG)
  • PCIe (2 x1 PCIe Slot, 1x Mini PCIe)
  • USB 2.0 (4x Host )
  • I2C (3x)
  • SPI (2x)
  • UART (2x RS232, 1x RS422/485)
  • IrDA (1x)
  • PWM (4x)
  • GPIO (up to 135)
  • Analog Input (4x)
  • Ethernet (1x 10/100/1000 Mbit)
  • SATA (1x)
  • SDIO/SD/MMC (1x 8 Bit, 1x 4 Bit)
  • CAN (2x)
  • LVDS (1x Dual Channel)
  • Digital Audio
  • S/PDIF In / Out (1x)
  • HDMI (1x)
  • VGA (1x)
  • RGB (1x 24 Bit)
  • Resistive Touch (4/5-wire)
  • Camera Parallel Interface (1x)
  • Analog Audio Line in (1x)
  • Analog Audio Mic in (1x)
  • Analog Audio Headphone out (1x)
  • JTAG
  • RTC on Board (1x)
  • USB-to-RS232 Transceiver (1x)

Block Diagram


Datasheets

Apalis Evaluation Board

Apalis Evaluation Board Datasheet

Design Resources

Design data Apalis Evaluation Board V1.1

Design data Apalis Evaluation Board V1.0

Apalis Evaluation Board Mechanical Models

A basic 3D model for the Apalis Evaluation board can be downloaded here:

Design and Layout Guide

Altium Designer

Compatible Products


[1] Capacitive Touch Adapter is required.

Revision History

Click to See the Product Numbering Scheme

Product Number (PID8) Format

The format of the 8-digits Product Number (PID8) is the following:

Product Numbering Scheme

The below table describes the structure of the Product Number (PID8):

FieldDescription
PPPP4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.)
VV2-digits number, indicating the Major and Minor Version (in that order)
AA2-digits number, indicating the Assembly Variant

See the complete list of available combinations on the Revision History table of the corresponding product page.

Example

Product number (PID8): 00291100:

0029: Apalis iMX6D 512MB
11: Major Version 1, Minor Version 1, Version V1.1 in short
00: Assembly Variant A

A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.

Apalis Evaluation Board

PN: 0115

Product #Product DescriptionChanges from Previous VersionRelease DatePCN Document
01151000
Apalis Evaluation Board V1.0A
Initial Release
2013-03-15
Evaluation Product, No PCN
01151100
Apalis Evaluation Board V1.1A
  • Fixed JTAG connector issue
  • Added ESD protection to some USB and HDMI signals
  • Pull-down POWER_ENABLE_MOCI
  • Added pull-up to the FT232 TxD pin
  • The detailed revision history to this version can be found in the Schematics on the first page
2014-09-15PCN Apalis Evaluation Board V1.1A 2019-11-06
01151101
Apalis Evaluation Board V1.1B
Interim product, only for the Apalis iMX8 Early Access
  • R44 changed to a 0Ω-resistor for sufficient power supply for the Apalis iMX8
2019-05-07Interim Product, no PCN - see V1.1A for PCN
01151102
Apalis Evaluation Board V1.1C
  • R44 changed to a 5mΩ-resistor for sufficient power supply for the Apalis iMX8
  • X18 SD card holder changed from 8-bit to 4-bit due to EOL of the previous part
2019-11-06 
01151125
Apalis Evaluation Board V1.1Z
  • Additional version with limited features
  • Removed SPDIF transmitter X21 and related discrete parts
Q1, 2023 

Errata/Known issues

Errata Document

Apalis Evaluation Board Errata

Migration in Progress

Issue trackers are not yet available in the new developer website. See it on the archived developer website.



Send Feedback!