Embedded Linux BSP Q4 2023 Quarterly Release |
ELB-5484 | Fixed | AP Does Not Work Anymore After `hostapd` Restart | Apalis iMX8, Colibri iMX6ULL, Colibri iMX8X, Verdin AM62, Verdin iMX8M Mini, Verdin iMX8M Plus | Wi-Fi | | Low | No |
Description: Restarting hostapd makes it impossible for clients to connect to the AP. Workaround: Reboot the system after a hostapd configuration change. It's also possible to rmmod / modprobe mwifiex before restarting hostapd to apply the configuration change without a reboot. |
Embedded Linux BSP Q4 2022 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-6-1-0-quarterly |
ELB-4799 | Fixed | Wi-Fi Connection not Stable | Verdin iMX8M Mini | Wi-Fi | | Low | No |
Description: Wi-Fi connection is not stable, it stops working after less than a minute of stress testing. |
Embedded Linux BSP 5.7.5 Maintenance Release |
ELB-5484 | Known Issue | AP Does Not Work Anymore After `hostapd` Restart | Apalis iMX8, Colibri iMX6ULL, Colibri iMX8X, Verdin AM62, Verdin iMX8M Mini, Verdin iMX8M Plus | Wi-Fi | | Low | No |
Description: Restarting hostapd makes it impossible for clients to connect to the AP. Workaround: Reboot the system after a hostapd configuration change. It's also possible to rmmod / modprobe mwifiex before restarting hostapd to apply the configuration change without a reboot. |
Embedded Linux BSP Q1 2022 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-6-0-quarterly |
ELB-4148 | New Feature | Disable Background Scanning for WiFi with Connman - wpa_supplicant | Apalis iMX8, Colibri iMX6ULL, Colibri iMX8X, Verdin iMX8M Mini, Verdin iMX8M Plus | Buildsystem, Wi-Fi | | | No |
Description: Disabled Wi-Fi background scanning |
Embedded Linux BSP Q4 2021 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-5-0-quarterly |
ELB-4208 | New Feature | Update wireless firmware to latest version | Apalis iMX8, Colibri iMX8X, Verdin iMX8M Mini, Verdin iMX8M Plus | Wi-Fi | | | No |
Description: Update mwifiex WiFi firmware to 2021-07-16 |
Dunfell Q4 2020 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-1-0-quarterly |
ELB-3003 | Fixed | Mwifiex: Invalid Sched_Scan Parameters | Apalis iMX8, Apalis iMX8X, Colibri iMX6ULL, Colibri iMX8X, Verdin iMX8M Mini | Wi-Fi | | Low | No |
Description: When using the on-module Wi-Fi "Invalid Sched_scan" message appears. This error message has no meaning in our use-case so we removed it. |
Deferred release. See more at https://www.toradex.com/blog/torizon-yocto-project-long-term-support-alignment |
ELB-2329 | Feature Request | Wi-Fi Access Point not Working | Verdin iMX8M Mini | Wi-Fi | | | No |
Description: Wi-Fi only works partially in access point mode. |
LTS release. Learn more on https://www.toradex.com/news/embedded-linux-yocto-project-bsp-3-0-4-lts-for-imx-tk1-system-on-modules |
ELB-2019 | New Feature | On-module WiFi support | Verdin iMX8M Mini | Wi-Fi | | Low | No |
Description: Onboard WiFi is not fully validated and documented |
ELB-5195 | Known Issue | Wi-Fi Firmware Crash With Intensive (24h+) Bluetooth Low Energy Scan | Verdin iMX8M Mini | Wi-Fi | | Low | No |
Description: Leaving a BLE (Bluetooth Low Energy) scan running for >24 hours can cause the wifi and Bluetooth interfaces to disappear. |
ELB-3039 | Known Issue | Concurrent Use of SDIO Wi-Fi and Bluetooth May Crash Firmware/Driver | Colibri iMX6ULL, Verdin iMX8M Mini, Verdin iMX8M Plus | Bluetooth, Wi-Fi | | Low | No |
Description: Simultaneous use of Wi-Fi and Bluetooth interfaces can lead to crashes of the firmware and/or the Linux kernel driver of the SDIO Wi-Fi/BT solution. Workaround: Unload (rmmod) the entire Wi-Fi and Bluetooth stack and reload (insmod) it again. Worst case an entire system reboot may be required. Note: NXP is still working on the concurrent Wi-Fi Bluetooth use case. |