| Embedded Linux BSP Q4 2023 Quarterly Release |
 ELB-5484 | Fixed | AP Does Not Work Anymore After `hostapd` Restart | Apalis iMX8, Colibri iMX6ULL, Colibri iMX8X, Verdin AM62, Verdin iMX8M Mini, Verdin iMX8M Plus | Wi-Fi | | Low | No |
Description: Restarting hostapd makes it impossible for clients to connect to the AP. Workaround: Reboot the system after a hostapd configuration change. It's also possible to rmmod / modprobe mwifiex before restarting hostapd to apply the configuration change without a reboot. |
| Embedded Linux BSP Q3 2023 Quarterly Release |
| ELB-5109 | Fixed | Wi-Fi AP Allows Maximum One Client | Apalis iMX8, Colibri iMX8X | Wi-Fi | | Low | No |
Description: A maximum of one client is supported when Wi-Fi is in AP mode. |
| Embedded Linux BSP Q2 2023 Quarterly Release. |
| ELB-5034 | Fixed | PCIe/Wi-Fi/BT Interface Is Not Working Reliably | Apalis iMX8 | Bluetooth, PCIe, Wi-Fi | | Low | No |
Description: PCIe devices, including Wi-FI, are not always detected at boot, failure rate is about 5%. |
| Embedded Linux BSP 5.7.5 Maintenance Release |
| ELB-5484 | Known Issue | AP Does Not Work Anymore After `hostapd` Restart | Apalis iMX8, Colibri iMX6ULL, Colibri iMX8X, Verdin AM62, Verdin iMX8M Mini, Verdin iMX8M Plus | Wi-Fi | | Low | No |
Description: Restarting hostapd makes it impossible for clients to connect to the AP. Workaround: Reboot the system after a hostapd configuration change. It's also possible to rmmod / modprobe mwifiex before restarting hostapd to apply the configuration change without a reboot. |
| Embedded Linux BSP Q1 2022 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-6-0-quarterly |
| ELB-4148 | New Feature | Disable Background Scanning for WiFi with Connman - wpa_supplicant | Apalis iMX8, Colibri iMX6ULL, Colibri iMX8X, Verdin iMX8M Mini, Verdin iMX8M Plus | Buildsystem, Wi-Fi | | | No |
Description: Disabled Wi-Fi background scanning |
| Embedded Linux BSP Q4 2021 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-5-0-quarterly |
| ELB-4208 | New Feature | Update wireless firmware to latest version | Apalis iMX8, Colibri iMX8X, Verdin iMX8M Mini, Verdin iMX8M Plus | Wi-Fi | | | No |
Description: Update mwifiex WiFi firmware to 2021-07-16 |
| Dunfell Q4 2020 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-1-0-quarterly |
| ELB-3003 | Fixed | Mwifiex: Invalid Sched_Scan Parameters | Apalis iMX8, Apalis iMX8X, Colibri iMX6ULL, Colibri iMX8X, Verdin iMX8M Mini | Wi-Fi | | Low | No |
Description: When using the on-module Wi-Fi "Invalid Sched_scan" message appears. This error message has no meaning in our use-case so we removed it. |
| This release supports Verdin iMX8M Mini, Apalis TK1, Apalis iMX6, Apalis iMX8, Colibri iMX6, Colibri iMX6ULL, Colibri iMX7 and Colibri iMX8X. Learn more on https://www.toradex.com/news/3-0b3-embedded-linux-bsps-for-apalis-colibri-verdin-system-on-modules |
| ELB-1718 | New Feature | WiFi Support | Apalis iMX8 | Wi-Fi | | Low | No |
Description: Add and validate WiFi support on Apalis iMX8. |
| ELB-1712 | New Feature | USB WiFi Support | Apalis iMX8 | Wi-Fi | | Low | No |
Description: Support the USB WiFi products available in the Toradex webshop |
| ELB-1120 | Feature Request | Add Modules Parameter to MWiFiex Driver For Single Antenna Operation | Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Colibri VF50, Colibri VF61, Apalis TK1, Colibri T20, Colibri T30, Apalis T30, Apalis iMX8 | Wi-Fi | | Low | No |
Description: For single antenna set single_rf=0x01 |
| ELB-5035 | Known Issue | PCIe Wi-Fi/BT Not Properly Initialized at Boot (<0.5% time) | Apalis iMX8, Colibri iMX8X | Bluetooth, Wi-Fi | | Low | No |
Description: It is possible that the Wi-Fi/BT interface is not properly detected at boot time with the following error message: `FW failed to be active in time` |
