Embedded Linux BSP Q2 2023 Quarterly Release. |
ELB-3988 | New Feature | Make LEDs of KSZ9131 PHY Behave the Same As KSZ9031 | Apalis iMX6, Apalis iMX8, Verdin iMX8M Mini, Verdin iMX8M Plus | Ethernet | | | No |
Description: Due to an Errata of the KSZ9131 PHY, one of the LEDs on the Ethernet connector is falsely lit up, even if the PHY is not connected. Workaround: Set bit9 to 1 in register 30 (decimal) of the KSZ9131 PHY. |
Embedded Linux BSP Q3 2022 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-6-0-0-quarterly |
ELB-4538 | New Feature | Use Random Private MAC Addresses for USB RNDIS Interface | Apalis iMX6, Apalis iMX8, Colibri iMX6, Colibri iMX6ULL, Colibri iMX7, Colibri iMX8X, Verdin iMX8M Mini, Verdin iMX8M Plus | Ethernet, USB | | | No |
Description: Use random MAC addresses from the private IEEE range instead of `00:14:2d:ff:ff:ff` and `00:14:2d:ff:ff:fe` for the USB RNDIS ethernet interface |
Embedded Linux BSP Q2 2022 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-7-0-quarterly |
ELB-4429 | Fixed | MDIO read timeout | Apalis iMX6, Apalis iMX8, Colibri iMX6, Colibri iMX6ULL, Colibri iMX7, Colibri iMX8X, Verdin iMX8M Mini, Verdin iMX8M Plus | Ethernet | | Low | No |
Description: MDIO read timeout is randomly popping up during link-up and causing ethernet to stop working Workaround: Setting the interface down and up again fixes the problem |
Embedded Linux BSP Q4 2021 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-5-0-quarterly |
ELB-3988 | New Feature | Make LEDs of KSZ9131 PHY Behave the Same As KSZ9031 | Apalis iMX6, Apalis iMX8, Verdin iMX8M Mini, Verdin iMX8M Plus | Ethernet | | | No |
Description: Due to an Errata of the KSZ9131 PHY, one of the LEDs on the Ethernet connector is falsely lit up, even if the PHY is not connected. Workaround: Set bit9 to 1 in register 30 (decimal) of the KSZ9131 PHY. |
Embedded Linux BSP Q1 2021 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-2-0-quarterly |
ELB-3340 | Fixed | After Waking up From Suspend Mode, Ethernet Is Disabled | Verdin iMX8M Mini | Ethernet | | Low | No |
Description: Ethernet is disabled when waking up after a suspend. |
Dunfell Q4 2020 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-1-0-quarterly |
ELB-3134 | New Feature | U-Boot: Accommodate New KSZ9131 Ethernet PHY | Verdin iMX8M Mini | Ethernet | | | No |
Description: Add support for new KSZ9131 PHY in U-Boot. |
ELB-3133 | New Feature | New V1.1 Device Tree to Accommodate New KSZ9131 Ethernet PHY | Verdin iMX8M Mini | Ethernet | | | No |
Description: Add support for new KSZ9131 PHY on V1.1 modules. |
LTS release. Learn more on https://www.toradex.com/news/embedded-linux-yocto-project-bsp-3-0-4-lts-for-imx-tk1-system-on-modules |
ELB-1299 | New Feature | Add support for Ethernet PHY KSZ9131 | Verdin iMX8M Mini, Apalis iMX8X, Apalis iMX6, Apalis iMX8 | Ethernet | | Low | No |
Description: KSZ9031 is not IEEE compliant and will be replaced with KSZ9131 that passed compliance testing. Currently, we do not plan to replace existing KSZ9031 PHY on iMX6 modules. |
This release supports Verdin iMX8M Mini, Apalis TK1, Apalis iMX6, Apalis iMX8, Colibri iMX6, Colibri iMX6ULL, Colibri iMX7 and Colibri iMX8X. Learn more on https://www.toradex.com/news/3-0b3-embedded-linux-bsps-for-apalis-colibri-verdin-system-on-modules |
ELB-1970 | New Feature | Ethernet Support | Verdin iMX8M Mini | Ethernet | | Low | No |
Description: Add support for Ethernet in bootloader and kernel. |
ELB-3989 | Feature Request | Switch Ethernet Connector LINK/ACT LEDs in Software | Verdin iMX8M Mini, Verdin iMX8M Plus | Ethernet | | | No |
Description: The LEDs of the on-module PHYs are swapped in hardware. We will resolve this issue by swapping the LEDs on the affected Verdin Carrier-Boards. Workaround: You can swap the LED behaviour using the Enhanced LED mode of the PHY. Make sure you also set bit15 in register 23 (0x17) to '1' on the PHY. Please refer to the KSZ9131 datasheet for more information on how to set the LEDs. |
ELB-4694 | Known Issue | Verdin Ethernet Spurious Link Up/Down Events | Verdin AM62, Verdin iMX8M Mini, Verdin iMX8M Plus | Ethernet | | Low | No |
Description: Second ethernet interface (FEC) can have some spurious link up/down events |