Embedded Linux BSP Q3 2023 Quarterly Release |
ELB-4988 | Fixed | USB SDP/Fastboot Recovery Not Working | Verdin iMX8M Plus | Bootloader, USB | | Low | No |
Description: USB SDP/Fastboot recovery is not working in U-Boot. |
Embedded Linux BSP Q4 2022 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-6-1-0-quarterly |
ELB-4923 | New Feature | Use USB Network Control Model (NCM) For Ethernet-over-USB | Apalis iMX6, Apalis iMX8, Colibri iMX6, Colibri iMX6ULL, Colibri iMX7, Colibri iMX8X, Verdin iMX8M Mini, Verdin iMX8M Plus | Buildsystem, USB | | | No |
Description: USB RNDIS supports is getting deprecated [1], move USB Ethernet-over-USB functionality to USB NCM, updating libusbgx configuration.
Starting with Windows 10 this USB protocol is also available in Windows and it has been available in Linux for a long time.
[1] https://lore.kernel.org/all/20221123124620.1387499-1-gregkh@linuxfoundation.org/ |
ELB-4695 | Fixed | USB OTG Host/Client Switching Not Working | Verdin iMX8M Plus | USB | | Low | No |
Description: USB Port works only in host mode. |
Embedded Linux BSP Q3 2022 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-6-0-0-quarterly |
ELB-4538 | New Feature | Use Random Private MAC Addresses for USB RNDIS Interface | Apalis iMX6, Apalis iMX8, Colibri iMX6, Colibri iMX6ULL, Colibri iMX7, Colibri iMX8X, Verdin iMX8M Mini, Verdin iMX8M Plus | Ethernet, USB | | | No |
Description: Use random MAC addresses from the private IEEE range instead of `00:14:2d:ff:ff:ff` and `00:14:2d:ff:ff:fe` for the USB RNDIS ethernet interface |
Embedded Linux BSP Q1 2022 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-6-0-quarterly |
ELB-4233 | New Feature | Bring-up and basic testing of USB OTG interface | Verdin iMX8M Plus | USB | | | No |
Description: Add support for USB OTG Port on Verdin iMX8M Plus. |
ELB-3385 | New Feature | Feature Set: Linux: USB Host / Client Switching | Verdin iMX8M Plus | USB | | | No |
Description: Add support for USB Host/Client switching on Verdin iMX8M Plus V1.0B. |
ELB-3384 | New Feature | Feature Set: Linux: USB Host | Verdin iMX8M Plus | USB | | | No |
Description: Add support for USB Host on Verdin iMX8M Plus. |
Embedded Linux BSP Q3 2021 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-4-0-quarterly |
ELB-4002 | New Feature | USB_1_EN is enabled in client mode and creates backfeeding | Verdin iMX8M Plus | USB | | | No |
Description: USB_1_EN signal gets enabled during kernel boot. This leads to the USB power switch being enabled, hence sourcing the VBus voltage. This leads to the board being powered by USB Client, even when unplugging the power to the Verdin Development Board. This ticket is about fixing this in software, so USB_1_EN is not high when in client mode. |
Dunfell Q4 2020 Quarterly Release. Learn more on https://www.toradex.com/news/bsp-layers-reference-images-yocto-project-5-1-0-quarterly |
ELB-3207 | New Feature | Must Have: Recovery Mode | Verdin iMX8M Plus | USB | | | No |
Description: Add support for recovery mode. |
ELB-3216 | Feature Request | Best Effort: Linux: USB host | Verdin iMX8M Plus | USB | | | No |
Description: Add support for USB Host on Verdin iMX8M Plus V1.0B. |