Skip to main content

Resistive Touch Display 7" Parallel

Resistive Touch Display 7 Inch Parallel Front

Resistive Touch Display 7 Inch Parallel Back

(Double-Click to Zoom)

Getting Started​

This page contains basic information related to the Resistive Touch Display 7 Inch Parallel and is intended to be used as a single point of access for all information you need. Cables are included with the display and allow an easy connection to Toradex carrier boards supporting the Unified Display Interface.

Recommendation for a first-time order​

For starting with the Resistive Touch Display 7" Parallel Toradex recommends the following products:


All the products can be ordered online at Toradex Webshop

First Steps​

Please check the article below for all details on using the displays.

Having trouble?​

Please contact our technical support. Various options of technical support are mentioned in the article below.

Features​

Main Features​

Resistive Touch Display 7" Parallel​

  • Resolution: 800x480px
  • 18-bit RGB
  • 4-Wire Resistive Touch
  • 40 pin FFC cable to connect it with a Carrier Board
  • No special drivers required

Datasheets​

Datasheet​

Resistive Touch Display 7 Inch Parallel - Datasheet

Mechanical Model​

Compatible Products​

Revision History​

Click to See the Product Numbering Scheme

Product Number (PID8) Format​

The format of the 8-digits Product Number (PID8) is the following:

Product Numbering Scheme

The below table describes the structure of the Product Number (PID8):

FieldDescription
PPPP4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.)
VV2-digits number, indicating the Major and Minor Version (in that order)
AA2-digits number, indicating the Assembly Variant

See the complete list of available combinations on the Revision History table of the corresponding product page.

Example​

Product number (PID8): 00291100:

0029: Apalis iMX6D 512MB11: Major Version 1, Minor Version 1, Version V1.1 in short00: Assembly Variant A

A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.

1213xxxx - Resistive Touch Display 7 Inch Parallel​

Product #Product DescriptionChanges from Previous VersionRelease DatePCN Document
12131000
Resistive Touch Display 7 Inch Parallel V1.0A
Initial Release
2017-09-20
PCN Resistive Touch Display 7" Parallel V1.0A 2019-04-05
12131001
Resistive Touch Display 7 Inch Parallel V1.0B
Fix of the backlight issue (see Errata #1)
Q2 2019
 

Errata​

Resistive Touch Display 7 Inch Parallel - Errata

Send Feedback!