Development Resources Documentation Overview

Serial/UART - Target Device Setup

On the Toradex SoMs, the U-Boot boot loader and the Linux kernel use UART_A as serial debug console. Check how to use, enable and disable the debug UART.

Serial/UART - Host Machine Setup

Learn how to use a serial terminal emulator to connect to the board from the debug UART port.

SSH - Connect Through Network

SSH can be used for encrypted login over the network or for encrypted file transfer between your host and the module. This article explore the usage of SSH on Toradex embedded Linux.

Scan your local network to find the board IP and MAC address

This article will show how you can scan your local network in order to find the IP address of your board.

Debugging with JTAG

In this article you will learn how to use the JTAG port to debug applications running in Cortex-M cores available in some of our modules.

Getting Device Information with Tdx-Info

In this article, you will learn how to use tdx-info, a script made by Toradex, to get useful information about Toradex hardware and software.