Capacitive Touch Adapter
The Capacitive Touch Adapter is an interface board designed to easily connect the Capacitive Touch Display 7" Parallel to the Colibri or Apalis Carrier boards which do not have PCAP connector yet available on board.
What I need to order
The Capacitive Touch Adapter can be ordered with Capacitive Touch Display 7 Inch Parallel, any Apalis or Colibri module and Carrier board. Please check compatibility tab for more details.
Where do I order
All the products can be ordered online at Toradex Webshop.
Please contact our technical support. Various option of technical support are mentioned in the article below.
- Connect Capacitive Touch Display 7 Inch Parallel to Toradex Carrier Boards
Design Data for Capacitive Touch Adapter
- Capacitive Touch Adapter Altium Project (Altium Designer Release 10)
- Capacitive Touch Adapter PDF Schematics
- Capacitive Touch Adapter Assembly Drawing
- Capacitive Touch Adapter Bill of Materials (BOM)
A basic 3D model for the Capacitive Touch Adapter can be downloaded here.
It is a generic STEP model that can be opened and modified in any 3D CAD.
It is a generic 3D pdf model that can be opened in Adobe Reader.
 For Ixora V1.0A Capacitive Touch Adapter is required, V1.1A or above are directly compatible.
 For Iris V1.1A and V1.1B Capacitive Touch Adapter is required, V2.0 or above are directly compatible.
Click to See the Product Numbering Scheme
Product Number (PID8) Format
The format of the 8-digits Product Number (PID8) is the following:
The below table describes the structure of the Product Number (PID8):
|PPPP||4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.)|
|VV||2-digits number, indicating the Major and Minor Version (in that order)|
|AA||2-digits number, indicating the Assembly Variant|
See the complete list of available combinations on the Revision History table of the corresponding product page.
Product number (PID8): 00291100:0029: Apalis iMX6D 512MB
11: Major Version 1, Minor Version 1, Version V1.1 in short
00: Assembly Variant A
A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.
0151xxxx - Capacitive Touch Adapter
|Product #||Product Description||Changes from Previous Version||Release Date||PCN Document|
|01511000||Capacitive Touch Adapter V1.0A||Initial Release||2017-09-20|